Products
Hot Products

Control Points And Safety Performance Of Compound Sewage Cover

In order to ensure the stability and safety of the composite well cover, it is necessary to control the factors in all aspects and strictly follow the design drawings. It is generally required to control the following places.
1. The removal of the ditch body formwork shall be carried out slowly to avoid damaging the edges and corners of the side ditch. After the removal of the formwork, the felt cloth or geotextile shall be used to cover and maintain the health in time. In order to ensure normal use, attention should be paid to the installation quality, not only the accuracy of the size, but also the convenience of opening, cleanness and beauty.
2. When installing the composite cover pouring concrete side ditch, the vibration shall be uniform and not be vibrated at the same place for a long time; in addition, pay attention to clean and wash the concrete missed on the road surface, and do not pollute the road surface.
3. It is required that the plane position, elevation and flow direction of the side ditch shall be strictly controlled in accordance with the construction design drawings during the construction of the soil side ditch.
composite manhole cover
4. It shall be clearly specified that mortar shall be used for leveling on the top of concrete side ditch wall during installation. In addition, the top surface of cover plate shall be roughened during the construction of pavement layer of level crossing. After the construction is completed, it shall be covered and cured in time, and it shall be released after the concrete strength reaches 80%.
Compared with the traditional cast iron cover, the composite cover made of new composite material has good safety performance, which is shown in the following aspects:
1. Composite cover can effectively reduce noise. Because the cast iron cover is mainly made of metal, when the vehicle passes by, the well cover will produce noise and disturb the nearby residents. The composite cover solves this problem well.
2. Compared with the special products of the same specification, the weight of the composite cover is only one third of that of the cast iron cover, which provides convenience for installation and maintenance.
3. The new composite cover uses a new reinforced support, even in the event of destructive load, there will be no crushing phenomenon.
It can be seen from the above content that the high performance and stability of composite well covers are also of practical significance for reducing roads.
Home | About Us | Products | News| Knowledge | Contact Us | Feedback |

Copyright © 2004-2019 Zibo Best Energy-Saving Materials Co., Ltd. Copyright.